CBX BIMISI Gebrauchsanleitung Seite 7

Take the frame out of the box. Release the foldlock. Open the frame, lifting upwards by holding
1
the handlebar. When you hear a clicking noise, the frame is assembled.
Place the wheel axle into the fitting. The assembly is complete when you hear a clicking noise a. In
2
order to release the wheel, press the quick release button and take the wheel off b.
Assembling the rear wheels: fit the rear wheels by pushing the wheel shafts into the fitting in the
3
direction of the arrow a. The assembly is complete when you hear a clicking noise. To release the
wheels push the release button b.
a is the handle bar adjustment button. b shows the hight adjustment of the handle bar,
4
3 positions. In order to switch the hight please press the button and press or pull the handle bar
slowly up or down.
For maximum manoeuvrability, the wheels can be swivel, press the button as shown in a down.
5
Front wheels must be lockes when in use uneven ground. You can do so by switching the button
up like shown in b.
Press the brake pedal to red to set the brake. If you use it to the green direection the brake will
6
be released.
To fold the frame: On left and right side of the chassis you see hooks installed on the frame. Pull
7
them both towards yourself to fold the chassis down.
When you hear a click noise the chassis is folded complete. The fold lock should be locked b.
The adapter for branded carseats (Cybex Silver Aton, CBX Aton, Maxi-Cosi Cabrio Fix) marked with
8
„R" is placed on the right side of the frame, the adapter marked with „L" is placed on the left side.
You should hear a „click" noise when installed correctly. Check that the adapter has been attached
properly before you put the carseat on top.
If using car seat 0+ Shima you do not need the adapter from frame.
Important — Keep these instructions for future reference.
Compatible with PURE, LUX, FLEX, Carrycot, CYBEX Aton Silver, ATON & Maxi Cosi Cabrio Fix (using
Adapter), SHIMA for BIMISI.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
EN
7