After Chopping/Cutting - Pacojet Coupe Set Bedienungsanleitung

After chopping/cutting

7.1.3
After the appliance has switched itself off automatically, complete the following steps:
2
1
45°
1
Remove the protective outer beaker with the paco-
1.
tizing beaker.
To do this, turn the protective outer beaker approx-
imately 90° to the right and into the start position
(handle pointing right) and slide it out at the bottom.
2.
Pacojet 1/Pacojet 2
Use the knife tongs (4) to remove the combination
of splash guard and processing tool (2-/4-blade
knife) downwards from the knife holder. Turn slightly
from right to left (clockwise) to release the blade
head from the knife holder.
Pacojet 2 Plus
Using the knife tongs, turn the combination of
2
splash guard and processing tool (2-/4-blade knife)
one eighth turn (approximately 45°) from right to
left (clockwise).
Then remove this downwards.
Take the pacotizing beaker out of the protective
3.
outer beaker.
Remove the food mixture and prepare for further
use.
Complete a cleaning cycle if you are not planning to
4.
use the PACOJET basic appliance again right away.
Then switch off the PACOJET basic appliance at the
MAINS SWITCH.
Please refer to the instructions in the
User Manual for your PACOJET basic
appliance.
EN
35