AUDIOLINE WAVE 10X Bedienungsanleitung Seite 28

Operating the Telephone
Programming the basic settings
Programming the basic settings relates to adapting the various
handset settings to your own personal needs. Press the ´ but-
ton to cancel the process. If no button is pressed over a period of 15
sec., the process is automatically terminated and none of the modi-
fications made are saved. Proceed as follows:
1. Programming the handset
®, y/z, HANDSET , ®,
2. Ringing volume for external calls
3. Ringing volume for internal calls
4. Ringing melody for external calls
5. Ringing melody for internal calls
6. Setting the language
1. Programming the setup
®, y/z, SETUP , ®,
2. Tone / Pulse dialling mode
3. Flash (recall) time (Flash 1 = 100 ms, Flash 2 = 300 ms)
28
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
y/z, EXT RING VOL , ®, y/z,
VOLUME OFF to VOLUME 3 , ®.
y/z, INT RING VOL , ®, y/z,
VOLUME OFF to VOLUME 3 , ®.
y/z, EXT MELODY , ®, y/z,
MELODY 1 to MELODY 3 , ®.
y/z, INT MELODY , ®, y/z,
MELODY 1 to MELODY 3 , ®.
y/z, LANGUAGE , ®, y/z, ®.
y/z, DIAL MODE , ®, y/z,
TONE DIAL / PULSE DIAL , ®.
y/z, RECALL
RECALL 1 / RECALL 2 , ®.
, ®, y/z,