Philips FC6132 Bedienungsanleitung Seite 9

Attaching the stick and the floor nozzle (FC6132 only)
1 To assemble the stick, connect the lower stick part to the upper
stick part ('click') (Fig. 2).
Note: You cannot disassemble the stick once you have assembled it.
2 Insert the stick into the attachment point for the stick at the back
of the appliance ('click') (Fig. 3).
- Make sure the ridge on the stick aligns with the attachment point on
the appliance when the stick is inserted.
3 To detach the stick from the appliance, press the stick release
button with one hand (1) and pull the stick out of the appliance
with the other hand (2) (Fig. 4).
4 Attach the floor nozzle to the nosepiece (Fig. 5).
You can use the floor nozzle to clean hard floors and carpets.
The floor nozzle is equipped with a fluff collector that removes hair
and fluff.
5 Put the plug in the wall socket.
Brush tool and crevice tool
You can use the brush tool to clean delicate surfaces.
With the crevice tool, you can quickly and conveniently clean hard-to-
reach places.
1 Attach the brush tool or the crevice tool to the nosepiece of the
appliance (Fig. 6).
Hose (FC6130 only)
This appliance comes with a hose for extended reach during vacuum
cleaning.
1 Insert the appliance end of the hose into the nosepiece of the
appliance (Fig. 7).
2 Attach the brush tool or the crevice tool to the attachment end of
the hose for extended reach during vacuum cleaning (Fig. 8).
ENGLISH
9