Special Settings; Audio Settings; Existing Settings In The Audio Menu - Grundig GBP 7000 3D Bedienungsanleitung

SPECIAL SETTINGS

Audio settings

1
Press »SETUP« on the remote control to open
the main menu.
2
In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
3 Select »Audio« by using »A« or »S« and
press »ENTER« to confirm.
– The audio menu opens.
4 Select the required function by using »A« or
»S« and press »ENTER« to activate.
5
Select your required settings by using »A« or
»S« and press »ENTER« to confirm.
6
Press »RETURN« or »a« to close the sub-
menu;
or
press »SETUP« to return to the main menu.
Existing settings in the Audio
menu
PCM Downsampling
Sets the player's digital output PCM sampling
rate.
Options: 48 kHz, 96 kHz, Off.
Incorrectly setting the digital audio output's
PCM sampling rate may result in unpredict-
able audio playback.
Digital Output
Sets the player's digital audio output sockets.
Options:
– PCM: Mixed digital audio sent over HDMI
in PCM (if supported by HDMI device) and
SPDIF in two channel PCM format.
-----------------------------------------------------------------------------------------------------
– Bitstream HD: Original bitstream from disc is
passed over HDMI and SPDIF using highest
quality possible. HDMI has higher quality
capabilities with advanced audio codecs
like TrueHD and DTS-HD. BD audio limited
to soundtrack for main movie (i.e. no PiP au-
dio, no effects audio).
– Bitstream Legacy: Original bitstream from
disc is passed over HDMI and SPDIF using
legacy audio formats. BD audio limited to
soundtrack for main movie (i.e. no PiP au-
dio, no effects audio).
– Bitstream Mixed: BD audio streams are
mixed and encoded into a single bitstream.
Primarily intended for customers with SPDIF
5.1CH receivers who want to enjoy mixed
BD audio in surround sound.
Dynamic Range Control
Is only active when a Dolby Digital signal is
detected.
Options:
– Off: you can enjoy the movie with the stand-
ard Dynamic Range.
– On: when movie soundtracks are played at
low volume or from smaller speakers, the sys-
tem can apply appropriate compression to
make low-level content more intelligible and
prevent dramatic passages from getting too
loud.
– Auto: the system turns on the Dynamic range
control for all BD movie soundtracks except
Dolby TruHD. If you have selected a Dolby
TruHD track on the BD disc, Auto tells the
player to only turn on dynamic range control
if information embedded in the Dolby TruHD
sound track tells it to do so.
Stereo Downmix
Sets »AUDIO OUT
Stereo (LoRo) or Surround Encoded (LtRt).
L/R« output to Auto,
29
ENGLISH