Connecting To The Mains Supply; Putting Batteries In The Remote Control - Grundig GBP 7000 3D Bedienungsanleitung

CONNECTION AND PREPARATION

Connecting to the mains supply

Notes:
Check that the mains voltage on the type
7
plate (on the back of the device) corre-
sponds to your local mains supply. If this is
not the case, contact your specialist dealer.
Before connecting the AC power cord to the
7
wall socket, ensure that all other connec-
tions have been made.
1
Plug the power cord into the wall socket.
Caution:
The device is connected to the mains with
7
the power cord. Pull out the power plug if
you want to completely disconnect the de-
vice from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
Putting batteries in the remote
control
1
Open the battery compartment by pressing
down on the catch and then remove the lid.
2
Observe the polarity marked on the base of
the battery compartment when inserting the
batteries (micro batteries, 2 x 1.5 V, R 03/
UM 4/AAA).
3 Close the lid of the battery compartment.
Notes:
Do not expose the batteries to extreme heat,
7
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
7
when you know that the device will not be
used for a long period of time. The manufac-
turer accepts no liability for damage caused
by leaking batteries.
Environmental note:
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
---------------------------------------
GBP 6000 2D
BLU-RAY DISC PLAYER
AC:110-240 V 50/60 Hz
~
POWER:17 W
SN
GLR 5800
11
ENGLISH