Intenso Q10000 Bedienungsanleitung Seite 15

Connect the supplied USB cable with the Quick Charge USB A connection
(USB QC OUT) on the Powerbank and the other end of the USB cable with
the micro USB connection of the Quick Charge compatible device to be
charged. The intelligent control of the Quick Charge 3.0 Technology
adapts the charge process for your connected device (5-6V 3.1A max., 9V
2.0A max., 12V 1.5A max.). Quick Charge 3.0 is backwards compatible
with previous versions. With this Powerbank you can also charge a Quick
Charge 2.0 device with the advantages of Quick Charge 2.0 Technology.
You can also connect a device not compatible with Quick Charge to the
USB QC OUT connection or operate a Quick Charge compatible device
with the normal USB OUT connection (output 5V 3.1A max.).
You can charge two devices at the same time with Powerbank, like a
tablet with the normal USB A connection (USB OUT) and a smartphone
with the Quick Charge (USB QC OUT) connection. However, the Quick
Charge Technology is supported only if only one Quick Charge capable
device is connected with USB QC OUT. With two contemporaneously
connected devices for both connections the normal charge standard is
used and the maximal output voltage is divided into both connections
(output 5V 3.1A max.).
Of course, you can also use our own USB charge cable to connect
Powerbank with your device. Please pay attention that devices can only
be charged by Powerbank USB A connections (USB A OUT / USB QC OUT)
and that for Quick Charge Technology you need a Quick Charge capable
USB cable (in case ask the producer of your USB cable).
If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.
Make sure that the heat caused by the charge process can be discharged
from the device (ideally put Powerbank on a solid and heat-resistant
surface during the use).
Page 6 of 8 EN