Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Correct Use; Staff Selection And Qualification; Organisational Safety Measures; Risks That Can Be Caused By The Product - Kessel Pumpfix F Comfort Anleitung Für Einbau, Bedienung Und Wartung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
2.
Safety
2.1.
Correct use
The Pumpfix control unit is to be used exclusively for controlling the backwater pumping station of the type
Pumpfix.
The control unit must not be used in a potentially explosive environment.
Any
- conversions or attachments
- use of non-genuine spare parts
- carrying out of repairs by companies or persons not approved by the manufacturer
which has been carried out without the express and written permission of the manufacturer will lead to a loss
of warranty.
2.2.

Staff selection and qualification

People who operate and/or install the Pumpfix Comfort control unit must
- be at least 18 years old
- have been sufficiently trained for the respective tasks
- be familiar with and follow the respective technical rules and safety regulations.
The owner-operator decides on the required qualifications for the
- operating staff
- servicing staff
- maintenance and repair staff
The owner-operator must ensure that only qualified staff work on the Pumpfix Comfort control unit.
Qualified
staff
ce as well as their knowledge of the relevant instructions, valid standards and accident preventi-
on regulations, can carry out the required tasks and both recognise and avoid any possible hazards.
Work on electrical components may only be carried out by specially trained specialist staff and under adherence
to all the valid accident prevention regulations (UVV).
2.3.

Organisational safety measures

The operating and maintenance instructions must always be kept near to the Pumpfix Comfort control unit.
2.4.

Risks that can be caused by the product

2.5.

Risk caused by electric current and cables

All live components must be protected against unintentional contact. Before housing covers, plugs and cables are
opened they must be switched voltage-free. Work on electrical components may only be carried out by specialist
staff (page 2.2).
Beware of the risk through electric current if a plug is opened without authorisation during operation e.g. through
children. The attachment nuts on the plug must be tightened firmly so that they cannot be opened by children.
2016/02
are
members
of
staff
SAFETY
who,
on
the
basis
27/120
of
their
training
and
experien-

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis