Ossa TR280i Benutzerhandbuch Seite 90

Multi-function
Temperature selector
To select the unit of temperature,
either ºC or ºF, press button 1.
Confirm the selection by
pressing button 2.
Danger temperature selector
Note:
This stage should only be
implemented for those vehicles
that have an optional temperatu-
re sensor. When the motorcycle
temperature exceeds the set
value, right-hand warning light
comes on.Default value: 110ºC
(230ºF).
Enter the value by pressing
button 1 repeatedly. To move on
to the next digit, press button 3.
Confirm the selection by
pressing button 2.
20 User manual
Warning temperature selector
Note:
This
implemented for those vehicles
that have an optional temperatu-
re sensor. When the motorcycle
temperature exceeds the set
value, the left-hand warning light
comes on.
Default value: 90ºC (190ºF).
Enter the value by pressing
1 2 3
button 1 repeatedly. To move on
to the next digit, press button 3.
Confirm
pressing button 2.
Gear change turn rate selector
When the set rate is near to
being reached, the left-hand
warning light will flash, indicating
the need to change gear.
Default value: 6000 rpm
Enter the value by pressing
button 1 repeatedly. To move on
to the next digit, press button 3.
1 2 3
Confirm
pressing button 2.
stage should only be
1
the selection by
1
the selection by
2 3
2 3