Special Features - Grundig TA 5040 Bedienungsanleitung

AT A GLANCE ____________________________
Dear Customer,
Congratulations on the purchase of your new
GRUNDIG Toaster TA 5040.
Please read the following user notes carefully to
ensure you can enjoy your quality product from
GRUNDIG for many years to come.

Special features

The GRUNDIG Toaster is equipped with:
1000 Watt output.
Defrost function.
Reheat function.
Variable browning control.
High-lift function.
OPERATION ______________________________
Preparation
1
Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulation.
2
Before using of the appliance for first time,
clean the appliance (See the "Cleaning and
care" section).
3
Make sure that the appliance is sitting in an
upright position and on a stable, flat, clean,
dry and non-slip surface.
Note
When using for the first time, smoke can
■
develop due to production residues. However,
this does not mean the appliance is defective.
The first time you turn it on, use the appliance
as you normally would, but without bread. It
is recommended to use the medium setting of
the browning control
proper room ventilation.
14 ENGLISH
to burn in. Ensure for
D
Control and parts
See the figure on page 3.
Bun warming rack
A
Bread slot
B
Start lever and High-lift
C
Browning control
D
Cancel button with indicator light
E
Defrost button with indicator light
F
Reheat button with indicator light
G
Housing
H
Crumb tray
I
Positioning lever for bun warming rack
J
Toasting
1
Insert only one slice of bread in each of the
two bread slots .
B
2 Connect the power plug into the wall socket.
3 Using the browning control
desired degree of browning.
Notes
Turning the browning control to the left will
■
give the lightest degree of browning and to
the right the darkest. The browning degree
can vary depending on the type of bread.
When toasting several slices of bread
■
consecutively, the toaster will become hotter
and therefore the bread will gradually become
darker. Therefore select an appropriate
browning degree. Let the toaster cool down
after each toasting process for approx. 15-20
seconds to reset the integrated thermostat.
by selecting the
D