hi-Fun hi-tube 2 Bedienungsanleitung Seite 17

Note: In order to obtain the best listening experience from
your hi-Tube2 Bluetooth®, both via bluetooth and jack lin e
input, we suggest to set the EQ of your connected device to
"small loudspeakers" setting.
If the jack cable remains connected to hi-Tube2 Bluetooth®
with no volume input, after about 10 minutes, hi-Tube2
Bluetooth® automatically switches itself off in order to
preserve the battery from discharging.
Recharging hi-Tube2 Bluetooth®.
If supported by paired devices, the charge status of hi-
Tube2 Bluetooth® battery is displayed on the screen of the
connected device.
When hi-Tube2 Bluetooth® battery is discharged the
transparent fins(2) start flashing red. It indicates that in few
minutes hi-Tube2 Bluetooth® will turn off in order to preserve
the battery. To charge the battery connect the supplied hi-
Tube2 Bluetooth® charger cable to a charger equipped with
USB port, or alternatively, to an USB port on your laptop/
computer. It is possible to charge hi-Tube2 Bluetooth® while
it is in use.
As soon as the charger cable is connected to the plug (8),
the transparent fins(2) turn on red and they turn off once the
charging is complete. When hi-Tube2 Bluetooth® is fully
charged it is possible to unplug it from the charger.
Alternately to the cable included, it is possible to use every
cable equipped with a micro USB connector.
Caratteristiche tecniche:
Model: hi-Tube2 Bluetooth®
Battery life: 8 Hrs