hi-Fun hi-tube 2 Bedienungsanleitung Seite 16

button for 2 second until you hear a long tone, then release
the button the incoming call is rejected.
•Activate voice dialing / voiceover / Siri: if your phone
supports voice dialing / voiceover / Siri you can activate it
if a phone call is not in progress. To activate voice dialing /
voiceover / Siri hold the button until you ear a tone from
hi-Tube2 Bluetooth®; when you hear the second tone you can
dictate the command.
•Call the last selected number: press twice (double click)
the button .
*Only if paired to a mobile phone.
hi-tube2 Bluetooth ® supports the simultaneous connection
of two Bluetooth devices. Connect the first device and then
perform the same procedure for the second device. At this
point you can connect simultaneously both paired devices.
The last device connected will have the priority.
Connection via 3,5mm stereo jack.
In addition to Bluetooth connection, hi-Tube2 Bluetooth®
features a line level input 3,5mm stereo jack. When the jack
plug is connected the Bluetooth connection remains active
but the priority is given to the jack input. When hi-Tube2
Bluetooth® is used with the jack input, it is only possible to
control the volume. All other functions must be controlled
on the connected device. The power button act as MUTE
button. Pressing it once will mute the volume (note: it does not
stop the reproduction), pressing it once again will restore the
previous volume setting.
Note: when hi-Tube2 Bluetooth® is connected via jack line
input only, internal microphone is not active. It is not possible
to use hi-Tube2 Bluetooth® as phone handsfree.