hi-Fun hi-bomb 2 Bedienungsanleitung Seite 17

plug is connected the Bluetooth connection remains active
but the priority is given to the jack input. When hi-Bomb2
Bluetooth® is used with the jack input, it is only possible to
control the volume. All other functions must be controlled
on the connected device. The power button act as MUTE
button. Pressing it once will mute the volume (note: it does not
stop the reproduction), pressing it once again will restore the
previous volume setting.
Note: when hi-Bomb2 Bluetooth® is connected via jack line
input only, internal microphone is not active. It is not possible
to use hi-Bomb2 Bluetooth® as phone handsfree.
Note: In order to obtain the best listening experience from
your hi-Bomb2 Bluetooth®, both via bluetooth and jack lin e
input, we suggest to set the EQ of your connected device to
"small loudspeakers" setting.
If the jack cable remains connected to hi-Bomb2 Bluetooth®
with no volume input, after about 10 minutes, hi-Bomb2
Bluetooth® automatically switches itself off in order to
preserve the battery from discharging.
Recharging hi-Bomb2 Bluetooth®.
If supported by paired devices, the charge status of hi-
Bomb2 Bluetooth® battery is displayed on the screen of the
connected device.
When hi-Bomb2 Bluetooth® battery is discharged the
transparent fins(2) start flashing red. It indicates that in few
minutes hi-Bomb2 Bluetooth® will turn off in order to preserve
the battery. To charge the battery connect the supplied hi-