Elora Testboy Profi LED Plus Bedienungsanleitung Seite 13

Proper and intended use
This instrument is intended for use in applications described in the operation manual
only. Any other usage is considered improper and non-approved usage and can
result in accidents or the destruction of the instrument. Any misuse will result in the
expiry of all guarantee and warranty claims on the part of the operator against the
manufacturer.
welders, induction heaters and other electromagnetic fields.
After an abrupt temperature fluctuation, the instrument
|
should be allowed to adjust to the new temperature for
about 30 minutes before using it. This helps to stabilize the
IR sensor.
Do not expose the instrument to high temperatures for a
|
long period of time.
Avoid dusty and humid surroundings.
|
Measurement instruments and their accessories are not
|
toys. Children should never be allowed access to them!
In industrial institutions, you must follow the accident
|
prevention regulations for electrical facilities and
equipment, as established by your employer's liability
insurance organization.
Please observe the following five safety rules:
Disconnect.
1
Ensure that the instrument cannot be turned back on again.
2
Ensure isolation from the main supply voltage (check that there
3
is no voltage on both poles).
Earth and short-circuit.
4
Cover neighbouring parts that are under live electrical load.
5
Remove the batteries during longer periods of inactivity in order to
avoid damaging the instrument.
We assume no liability for damages to property or personal injury
caused by improper handling or failure to observe safety
instructions. Any warranty claim expires in such cases. An
exclamation mark in a triangle indicates safety notices in the
operating instructions. Read the instructions completely before
- 13 -