REV Ritter F-688D Bedienungsanleitung Seite 7

Mounting
Choose a suitable place for the gong and bell button. Check the place you have chosen for power
lines before drilling holes.
Tip: Before final installation, test the desired function at the installation site of your choice.
Gong: Screw a screw into the wall until only a few millimetres protrude from it. Hang the gong on the
hanging loop provided or use the collapsible stand.
Bell button: Remove the back of the casing and drill through the drill holes provided. Then attach the
back of the casing to the wall with the screws and dowels included. Replace the front side. Or use
the accompanying double-sided tape for mounting.
Power supply operation
You can also power the gong using a power supply (not included). For this, use the mains adapter
socket on the side and observe the details under 'Technical Data'. If you operate the gong using a
power supply, you must not put any batteries in the gong.
WEEE Disposal Notice
According to the European regulations, used electrical and electronic equipment may no
longer be put out into unsorted rubbish. The symbol on the wheeled rubbish bin points out the
necessity for separated collection. Help us to protect the environment and ensure that this unit
is put out in the appropriate systems for separate collection once you do not use it any longer.
DIRECTIVE OF THE EUOROPEAN PARLIAMENT AND COUNCIL of 4th July 2012 concerning
used electrical and electronic equipment.
Battery disposal instructions
Batteries and rechargeable batteries must not be disposed of with household waste. Every
consumer is legally obliged to dispose of all batteries and rechargeable batteries, whether
or not they contain harmful substances, to a suitable commercial or municipal collection
point municipality/district so that they can be disposed of in an environmentally friendly
manner. Batteries and rechargeable batteries should only be returned in a discharged state!
CE Conformity Statement
REV Ritter GmbH hereby declares that it complies with radio equipment type F-688D
according to DIRECTIVE 2014/53/EU. The complete CE Declaration of Conformity can
be found under: www.rev.de under the corresponding article or type number.