vigo EPK4570E10 Bedienungsanleitung Seite 12

Figure 8. Placing the
convector to the
lower part of the wall
mounting brackets
Figure 10. Back view
of fastening the upper
10
5. Back side of the Electric Panel
Convector Heater with arrow sign
will be placed to the plastic part
of the wall mounting brackets as
shown in the figure 8. ()
6. The spring section on the wall
mounting brackets will be pulled
and put through the holes on the
upper part of the convector in order
to fix the unit.
Note: For any reason if you want to
uninstall your panel convector, you
should pull the upper hooks and
bend to front.
Figure 9.
Attaching upper
hook of the
wall mounting
brackets to the
convector
Figure 11.
Dimensions of the
convector after
assembly