Safety Lock; Turning Off The Appliance - vigo EPK4570E10 Bedienungsanleitung

EN
Programming the Timer / Turn on timer
Turn on timer covers a period of forty-eight (48) hours. The indicator display 23 will be set to zero if the program
memory is set for more than forty-eight (48) hours. E.g. you are leaving your house and want the appliance to
operate before you come home. In this case the plug must be placed in the socket and the power switch (See
Figure l.) has to be on and the on/off button should be off. You have to push the timer setting button ( ) to
without pushing the On/Off button ( ). You have to keep the button pushed until the hour requested for the
commencement of the operation of the appliance appears on the screen. When the setting is completed a
warning light will appear on the indicator display and will shine until the appliance starts to operate. The unit
will run automatically on the set time automatically and will start heating. If you want to reset the timer you
have to push the button ( ) to on position and then off again.
Turn off timer
Turn off timer is a function for turning off the appliance automatically when the appliance is working. Turn off
timer of the unit is maximum 8 hours. You have to push the timer setting button ( ) until the hour requested
to stop the operation of the appliance appears on the screen. When the setting is completed a warning light
will appear on the indicator display and will shine until the appliance starts to operate. This light will be on
until the appliance is off and the appliance will close automatically on the set time (hour) seen on the indicator
display. If you want to reset the timer you have to push the button ( ) to off position and then on again.

Safety lock

If you keep pressing the turn on safety button ( ) for a short period (about 2-3 seconds) while your device is
operating, the word "LO" -short for LOCK- appears on the screen. Buttons on the control panel will not work if
pushed after you make this setting. In order to re-operate the control panel buttons, you again have to press
the turn on safety button ( ) for a short period (about 2-3 seconds) and the word "UL" -short for UNLOCK- will
appear on the screen. After appearance of this word the buttons will be ready for general use.

Turning off the Appliance

If you push the On/off button 3-4 seconds appliance will turn off. Besides you can turn off your appliance by
pushing to power switch.
Note: The timer will keep the turn on timer or turn off timer program in its memory during a power
failure and when power is restored it will run the program and keep working in normal conditions. If you
want to reset the timer you have to turn off the power switch of the appliance.
15