Transfer The Settings - ABB IFC MC Handbuch

Settings in the programming tool
2.2

Transfer the settings

The formatting of the memory card is made when the project is transferred from
the programming tool to the operator terminal. When a project is transferred,
the terminal detects the setup parameters, and formats the memory card
according to those.
Formatting of the card takes some time (one to two minutes), and can cause
transfer time-out. Restart the transfer when the formatting is done, or adjust the
time-out under Transfer/Comm Settings in the programming tool.
Note!
Settings for the expansion card can also be made under Setup in the terminals.
Select slot and select IFC MC from the dialog. In MemCard maintenance the card
can be formatted, and projects and recipes can be transferred between the card
and the terminal memory.
See the manual for the operator terminals for further information.
ABB, 1SBC159005M0401
14