Vibration Load; Noise Pollution; Safety Information Regarding The Rechargeable Battery - AL-KO HT 2000 Betriebsanleitung

GB
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter
blades.
■
Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring. Cutter blades
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
3.3

Vibration load

■
Danger due to vibration
The actual magnitude of the vibration emis-
sions during the use of the appliance may de-
viate from that stated by the manufacturer.
Observe the following influencing factors be-
fore or during use:
■
Is the appliance being used as intended?
■
Is the material being cut or processed in
the proper manner?
■
Is the appliance in a proper condition of
use?
■
Is the cutting tool properly sharpened or
is the correct cutting tool installed?
■
Are the handle grips and any optional vi-
bration grips mounted, and are they firm-
ly attached to the appliance?
■
Only operate the tool at the motor speed re-
quired for the respective work. Avoid using
the maximum speed in order to reduce noise
and vibrations.
■
The noise and vibrations of the tool may in-
crease due to improper use and mainte-
nance. This leads to health damage. In this
case, immediately switch off the tool and
have it repaired by an authorised service
workshop.
■
The degree of stress due to vibration de-
pends on the work to be performed or on the
use of the tool. Estimate the stress and plan
appropriate work breaks. This considerably
reduces stress due to vibration over the en-
tire working time.
■
Extensive use of the tool exposes the opera-
tor to vibrations, which can lead to circulatory
issues ("white fingers"). To avoid this risk,
wear gloves and keep your hands warm. If
any symptoms of "white fingers" occur, im-
mediately consult a physician. These symp-
toms include: Numbness, loss of feeling, tin-
gling, itching, pain, reduced muscular
26
strength, changes in the colour or condition
of the skin. Normally these conditions affect
the fingers, hands or pulse. The risk increas-
es at low temperatures.
■
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Avoid working with the tool at temperatures
below 10 °C. Define how the vibration load
can be limited in a work plan.
3.4

Noise pollution

A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
3.5 Safety information regarding the
rechargeable battery
This section mentions all the basic safety infor-
mation to be heeded when using the recharge-
able battery. Read these instructions.
■
Only use the rechargeable battery as desig-
nated, i.e. for AL-KO rechargeable battery-
driven appliances. Only charge the recharge-
able battery with the AL-KO charging unit
provided.
■
Only unpack the new rechargeable battery
from the original packaging when it is to be
used.
■
Fully charge the rechargeable battery before
using it for the first time and always use the
specified charger. Comply with the details
given in these instructions for use for
charging the rechargeable battery.
Safety instructions
HT 2000