Assembling Vacuum Cleaner - Klarstein 10032907 Bedienungsanleitung

EN
16

ASSEMBLING VACUUM CLEANER

Always remove the power plug from the wall outlet before assembling or removing
accessories.
1. Attach the flexible hose into the vacuum connect the flexible hose into the air intake
duct, push in until you hear a "click," indicating it is in its locked position.
2. Fit the tube to the curved wand/hose extension. Push the tube into the curved
wand/hose extension.
3. Fit the floor brush to the tube. Push the tube into the floor brush. Adjust the tube to
the desired length.
4. Remove battery holder at first then insert the batteries LR03 (AAA) and refit the
holder.