Removal From Service, Demounting, Disassembly; Storage; Disposal - WDT UP 35 Betriebsanleitung

11

Removal from Service, Demounting, Disassembly,

DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. The machine has to stand
still before changing the safety cover, adapter and the dies.
CAUTION
+
Before starting maintenance, disassembly or repair work, the crimping machine must be
disconnected from air supply.
+
Maintenance work may be performed only by authorized and properly trained personnel.
The housing and the covers in particular may only be removed by specially trained
personnel.
+
When working with the pneumatic Parallel Crimp Machine UP 35, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the pneumatic Parallel Crimp
Machine UP 35.
+
Only one person is allowed to work on or with the machine at a time.
+
Work with caution.
12

Storage

Store the machine in the original box at room temperature.
13

Disposal

For the disposal of the pneumatic Parallel Crimp Machine UP 35, send it back to WEZAG
GmbH.
UP35-4481N26000-02/15 – REV.B1
Page 59 / 63