Bellman BE1341 Bedienungsanleitung Seite 67

Testing
It is easy to test the Bellman Alarm Clock, BE1341. If the Alarm Clock does not work as
described below, you can check further under Troubleshooting guide.
How to test
The BE1341 Bellman Alarm Clock should always be connected to the electric socket with
the enclosed power supply unit.
To test the flashing light, sound and vibration with the BE1270 Bellman Bed-shaker
(accessory):
• Switch on the alarm with the Alarm Dial (5) by turning it to position 1
• Turn the Alarm Pointer anticlockwise using the Alarm Call Knob (10) until the
alarm on the clock is activated.
• The Bellman Alarm Clock will give the following indications:
o Switching on clock face background illumination (3).
o Flashing with the flashing lights (17) on the front, provided that the Flash
Switch (9) is in the ON position.
o Emitting a sound signal, provided that the sound switch (7) is in the ON
position.
o A BE1270 Bellman Bed-shaker (accessory) will vibrate if connected
Two tests are required to carry out a full test of the external trigger; one to test contact and
another to test voltage. For further information see Activation. Please note that when the
Snooze Button (4) is pressed during an alarm from an external trigger, any further alarm
via the external trigger will be ignored for 45 seconds.
• Connect the alarm unit to the external trigger input (13).
• Activate the alarm.
• The Bellman Alarm Clock will give the following indications:
o Flashing with the flashing lights (17) on the front, provided that the Flash
Switch (9) is in the ON position.
o Emitting the sound signal selected via the external trigger signal switch (8),
provided that the Sound Switch (7) is in the ON position.
o If the BE1270 Bellman Bed Shaker (accessory) is connected, it will vibrate in
the way selected via the external trigger signal switch (13).
To test the built-in telephone connection:
• Connect input (15) on the Bellman Alarm Clock to an analogue telephone socket
using a BE9105 telephone flex (accessory) and an adapter plug (accessory).
• Ring the telephone number
• The Bellman Alarm Clock will give the following indications:
o Flashing with the flashing lights (17) on the front, provided that the Flash
Switch (9) is in the ON position.
o Emitting a ring-type sound signal, provided that the Sound Switch (7) is in the
ON position.
o The BE1270 Bellman Bed Vibrator (accessory) will vibrate if connected