Further Information - Bellman BE1341 Bedienungsanleitung

Appendix - Further information

Further information

Adjustments
No adjustments apart from setting the time and selecting the call time are required for normal use.
The relevant descriptions are provided below, if you wish to change a setting for some reason.
Signal pattern on external trigger
The signal type set during external activation and indicators and signals activated by an external
trigger can be altered using the switches (8), see figure below.
DIP switch LED pattern
settings
Green is constantly
lit
Green blinks
constantly
Yellow is constantly
lit
Yellow blinks
constantly
Orange blinks
constantly
Orange blinks
constantly
Red and Orange
constantly blink
Red blinks
constantly
Sound Vibration
1 x ding dong, low- Separate
frequency tone
2 x ding dong, high- Separate
frequency tone
1 x ring, low- Short
frequency tone
2 x ring ring, high- Short
frequency tone
Baby Rapid
Baby Rapid
VMA constant Long
Fire alarm constant Long
Flash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes