Telephone Connection; External Trigger - Bellman BE1341 Bedienungsanleitung

27
Setting the current time
Set the correct time with the Time Setting Knob (11).
Setting an alarm call
Turn the Alarm Pointer anticlockwise to the desired call time using the Alarm Call Knob (10).
Activate the alarm by turning the Alarm Dial (5) to position 1. If the power supply unit is
connected, the LEDs in the Snooze Button (4) will light up.
Snooze function
The snooze button lights when the alarm is activated and blinks when the snooze function is
activated. To conserve the built-in back-up battery, the snooze button will not light or blink
when the external power supply is disconnected, e.g. during a power failure.
The snooze function on the alarm delays the alarm call for approximately 3.5 minutes by
pressing the Snooze Button (4). During this time the LEDs in the Snooze Button (4) will blink.
Switching off the alarm call
The alarm is switched off completely by switching the Alarm Dial (5) to position 0.
Illumination of the clock face
The clock face's background light will come on when the alarm clock sounds or the snooze
button (4) is pressed.

Telephone connection

The telephone is connected via the Telephone Input (15). Use the BE9105 Telephone Flex
(accessory) and an adapter plug (accessory).
During activation via the telephone connection (15), further activations can be ignored for 45
seconds if the Snooze Button (4) is pressed.

External trigger

It is possible to connect the vibrator output on several of Bellman & Symfon AB's products or
other equipment that produces a contact or voltage to an external trigger (13) for activation.
In this way the Bellman Alarm Clock can be made to work as alarm equipment, e.g. for an
existing fire alarm.
During activation via the External Trigger (13), further activations can be disregarded for 45
seconds if the Snooze Button (4) is pressed.