oneConcept 10029383 Anleitung Seite 14

• Press FUNCTION repeatedly to select BT mdoe.
• Activate BT on your smartphone/tablet/computer and pair with „Worksite".
• Use the buttons PLAY/STOP/TUNING+/- to navigate through your media library or use your
external BT device.
Please note: When in AUX, BT or USB mode the device automatically switches to standb
when no input or change is made for 15 minutes.
• In Standby mode, press the ALARM/+10 button until the Alarm1 menu is shown (Press
twice for Alarm 2).
• OFF or ON is flashing to indicate that it can be changed. Rotate the TUNING+/- knob to
change between OFF and ON and short press ENTER/STOP to confirm
• The hour digits are now flashing. Use the TUNING+/- knob to set the required time and
short press the ENTER/STOP button to confirm.
• The minutes can now be set, as described above and then short press ENTER/STOP button
to confirm.
• To cancel the Alarm when it has activated. Press ALARM/+10 button or STANDBY button to
stop the alarm sound, the alarm will reset for next day.
• Alternatively, the Alarm will automatically switch off after 59 munites unless cancelled or
switched off manually.
• To de-activate, short press the ALARM/+10 button and while the Alarm settings are still
on screen, rotate the TUNING+/- knob to select alarm OFF then press ENTER/STOP button
to confirm.
While the device is playing, press SLEEP repeatedly to switch on and set the sleep timer in
steps of 15 minutes (off - 15min - 30min - 45min - 60min - 75min - 90min - off).
System Reset can be used to clear the station list, the presets and all Alarm and Sleep settings.
This is useful if you move the UNIT to a different location (when you move house for instance)
as some stations may not be available in the new area.
• In DAB & FM mode, long press the FUNCTION button until the display shows "Press Enter
Key to Reset".
• Short press the ENTER/STOP button. The display now shows ‚System Reset'.
• The UNIT will now clear the internal memory and automatically start a quick scan.
14
BT
Alarm
Sleep Timer
Reset