Axis P1367-E Bedienungsanleitung Seite 16

AXIS P1367-E Network Camera
NO NO TICE NO TICE TICE
Not pulling the cable back could cause water to seep in and damage the product.
5. Make sure that the cable gasket is fitted properly.
6. If connecting an auxiliary device, for example an I/O, audio, or external power device, to
the camera, repeat the steps above as applicable to the specific device.
NO NO NO TICE TICE TICE
Mount the connectors after the cables are pushed through the cable gasket.
1 Bottom cover
2
Screw T20 (4x)
3 Wall bracket
4
Bracket adjustment screw T30
7. Put the bottom cover on the wall mount and tighten the screws (torque 2 Nm).
16