Werbung
Installation
7. Installation
!
On installation, the minimum distance
between the hob and the hood must be
exactly complied with (see chapter 7.1
"Installation data") and follow the num-
bering of the steps and the additional
instructions. Execution with air exhaus-
ted outdoors (A- see also the installation
data). The vapours are extracted via an
ring.
The diameter of the exhaust air hose
must conform to that of the connector
ring. If a smoke non-return valve is used
or is planned, check whether it can open
the exhaust air hose. The extractor hood
can be equipped with one (top) or two
(top and back) extractor openings.
for use of the top extractor opening, as
an extractor hood.
plastic cover. This plastic cover can be
easily removed by turning counterclock-
ning which is not required.
32
in shape) can be neither washer nor rege-
nerated. In normal use and depending
on their size, replace every 4 to 6 months.
Comply with the relevant instructions on
the package.
for this model: K122
7.1 Installation data /
dimensions
Minimum distance from the lower edge of
the hood body:
to ceramic and cast cooking hobs 65 cm.
to gas hob 70 cm.
-
85 cm.
-1
Werbung
