Care And Maintenance - Trotec TTW 25000 S Bedienungsanleitung

9. Insert the front legs into the sockets on the base,
aligning the holes of the front legs with the holes
on the frame tubing.
10. Reinsert the screws from step.

04. care and maIntenance

m Prior to cleaning make certain that unit is
unplugged and disconnected from power
source.
The propeller, guard, and motor should be cleaned pe-
riodically to prevent overheating, and/or operating in
an imbalanced condition.
If cleaning is required remove parts, just remove gu-
ard by loosening the eight screws and reinstall by
tightening back the screws after cleaning.
Use soft damp cloth then wipe with dry cloth. Do not
use harmful cleaners. Do not bend the blades. Electri-
cal parts should never be immersed in water.
Motor is permanently lubricated.
m Ensure that propeller is replaced in correct
direction as factory installed.
In the European Union electronic equipment
must not be treated as domestic waste, but
must be disposed of professionally in ac-
cordance with Directive 2002/96EU of the
European Parliament and Council of 27th January
2003 concerning old electrical and electronic equip-
ment. At the end of its life please dispose of this in-
strument in a manner appropriate to the relevant legal
requirements.
B - 2
Operating Manual – TTW 25000 S / TTW 35000 S EN