E-Mu 1212M Bedienungsanleitung Seite 14

The E-MU 0202 I/O Daughter Card
The I/O daughter card provides one pair of 24-bit balanced analog inputs and one pair of 24-bit balanced analog outputs,
plus MIDI in and out. The I/O daughter card provides the analog inputs, outputs, and MIDI interface for E-MU digital audio
systems which don't include the AudioDock. The E-I/O Daughter card takes up one extra space on the back panel of your
computer, and connects to the E-MU 1010 PCI card via an internal 40-pin ribbon cable.
Connections
Left / Right
Line Inputs
Left / Right
Line Outputs
MIDI
In/Out
14 - E-MU Digital Audio System
The inputs can be connected to any line level stereo signal from a keyboard,
CD-player, cassette deck, etc. (The analog inputs are assigned to mixer strips
in the PatchMix DSP mixer application.)
The outputs can feed any line level input such as a mixing board, the
Analog Inputs and
auxiliary input on your stereo, or a set of powered speakers.
Outputs
Either TRS balanced or TS unbalanced cables can be used. Balanced cables
provide better noise immunity and +6dB higher signal level. The output line
level can be set to accommodate the consumer -10dBV standard, or the pro
audio +4 dBu standard in the I/O screen of the Session Settings dialog box.
The MIDI input and output port can be assigned in your specific MIDI
application. Connect the MIDI adapter cable that came with your I/O
MIDI In/Out Daughter card to the mini-DIN connectors on the card. The supplied MIDI
adapter cables convert the mini-DIN to standard DIN connectors used on
most keyboards and synthesizers.