Rear Panel Connections - E-Mu 1212M Bedienungsanleitung

Rear Panel Connections

The rear of the AudioDock provides: 6 balanced analog inputs and 8 balanced analog outputs, a stereo turntable preamp
with grounding lug. 1 additional set of MIDI I/O ports, and a set of alternate 3.5mm output jacks which parallel the 8 line
outputs.
6 Balanced Line Level Inputs
(configured as 3 stereo pairs)
1L 1R
In
Out
1L 1R
6 Balanced Line Level Outputs
(configured as 3 stereo pairs)
Six balanced 24-bit, line-level, analog inputs are provided (1-3). These can be used to input any line level signal
such as a keyboard, CD-player, cassette deck, etc. (The analog inputs are assigned to mixer strips in the PatchMix
DSP mixer application.) Input line level can be set to accommodate the consumer -10dBV standard, or the pro
Line Level
audio
Analog Inputs
+4 dBu standard in the I/O screen of the Session Settings dialog box.
Either TRS balanced or TS unbalanced cables can be used. Balanced cables provide better noise immunity and
+6dB higher signal level, but standard mono instrument cables also work well.
12 - E-MU Digital Audio System
3L 3R
2L 2R
2L 2R 3L 3R
Turntable Inputs Turntable
(tied to line input 3)
Ground
3L 3R Gnd
Phono
Monitor
4L
4R In
Monitor
Outputs
Alternate Outputs
(same as outputs 1-4)
L /R Sr L / R Ctr/ Sub SrBk L / R
Card
MIDI 2
Out
MIDI Port 2 Connect to
In/Out E-MU 1010 Card
1 - 4