Axis 212 PTZ Installationsanleitung Seite 8

Page 8
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually set a static IP address. AXIS IP Utility is available on the Axis Network
Video Product CD, or it can be downloaded from www.axis.com/techsup.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS 212 PTZ/-V.
Automatic discovery
1. Check that the AXIS 212 PTZ/-V is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When AXIS 212 PTZ appears in the window, double-click to open the camera's home page.
4. See page 10 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected to.
2. Select the AXIS 212 PTZ in the list.
3. Click the button
4. Click the Assign button and follow the on-screen instructions. Note that the camera must be
restarted within 2 minutes for the new IP address to be set.
5. Click View Home Page to access the AXIS 212 PTZ/-V web pages.
6. See page 10 for instructions on how to set the password.
Note:
AXIS 212 PTZ-V will display in AXIS Camera Management as AXIS 212 PTZ
Assign new IP address to selected device and enter the IP address.
AXIS 212 PTZ/-V Installation Guide
.