Setting The Password - Axis 212 PTZ Installationsanleitung

Page 10

Setting the Password

1. When accessing AXIS 212 PTZ/-V for the
first time, the 'Configure Root Pass-
word' dialog is displayed.
2. Enter a password and then re-enter it, to
confirm the spelling. Click OK.
3. Enter the user name root in the 'Enter
Network Password' dialog.
Note: The default administrator user
name root cannot be deleted.
4. Enter the password as set in step 2
above, and click OK. If the password is lost, AXIS 212 PTZ/-V must be reset to the factory
default settings. See page 15.
5. If required, click Yes to install AMC (AXIS Media Control), to allow viewing of the video stream
in your browser. You will need administrator rights on the computer to do this.
6. The Live View page of the AXIS 212 PTZ/-V is displayed, with links to the Setup tools, which
allow you to customize the camera.
AXIS 212 PTZ/-V Installation Guide
Help - Displays online help on
all aspects of using the
camera.
Setup - Provides the neces-
sary tools for configuring the
camera to suit your
requirements.