Connecting; Power Supply - Medion MD 90071 Bedienungsanleitung

Connecting

Pay attention to the following information, in order to connect your device correctly:

Power supply

• Do not open the power adapter housing. When the housing is open there is a danger of severe elec-
tric shock. It contains no user-serviceable parts.
• The electric outlet must be in the vicinity of the device and within reach of the power adapter cables.
• Only use the device with a power adaptor operating at AC 100-240V~, 50/60 Hz. For details on
power consumption, please refer to the rating plate on the rear of your device. If you are unsure of
the type of power supply available at the point of use, ask your local power company.
• To disconnect your notebook from the power source, or set the notebook to battery operation, remove
the power cord from the notebook's power socket. Never pull on the power cord.
• Do not cover the power supply unit, in order to avoid damage through unacceptable warming.
• Stop using the power supply unit if the housing or the feed line to the device is damaged. Replace it
with a power supply unit of the same type.
• To avoid power consumption when the device is switched off either pull out the power plug when the
device is not used or connect the device to a master-/slave power bar.
• Use only the supplied power cord and power adapter.
• If using an extension cord, make certain that it meets your local safety requirements. If in doubt, con-
sult an electrician.
• To provide additional protection against electric shock, power surges, lightning strikes, or other elec-
trical damage to your device, we recommend the use of a surge protector.
Safety instruction
DE
EN
FR
ES
NL
IT
DK
PL
3