Materials; Consumables; Packaging; Appendix - Abicor Binzel CR1000 Betriebsanleitung

CR1000/CR1250

12.1 Materials

This product is mainly made of metallic materials which can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labelled in preparation for their sorting and
separation for later recycling.

12.2 Consumables

Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
materials must be stored, transported and disposed of in suitable containers. Please observe the relevant
local regulations and disposal instructions in the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be disposed of in accordance with
the information provided by the consumables' manufacturer.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.

13 Appendix

13.1 CR1000 spare parts

1
19
18
17
16 15
Fig. 8 CR1000 spare parts
2 3
14 13 12
4 5 6
11
13 Appendix
7
8
9
10
EN - 19