Functional Description - Abicor Binzel CR1000 Betriebsanleitung

CR1000/CR1250

5 Functional description

The CR1000/CR1250 cooling unit pumps and monitors the cooling medium. All required components and
connections have been installed in the housing. A flow control is integrated into the cooling unit by default.
1
9
8
7
6
1 CR1000/CR1250 cooling unit
2 Coolant filler neck
3 On/off switch
Fig. 4 Components of the CR1000/CR1250 cooling unit
NOTICE
• To permanently monitor the correct functioning of the entire cooling system we recommend that you
 Fig. 5 Overview of the coolant circuit on page EN-10
• If the flow rate is too low, the flow control instigates the immediate switch-off of the connected devices
4 Fuse
5 Coolant container with fill level indicator
connect the active flow control connector (9) to the power source.
and prevents thermal overload.
2
6 Coolant outlet neck
7 Coolant return (red)
5 Functional description
3
4
5
8 Coolant supply (blue)
9 Flow control connector
EN - 9