Dry Cleaning; Damp Cleaning; Maintenance - Walther-Werke 39100301250300 Montage- Und Bedienanleitung

WARNING
Death or risk of injury from electric shock due to contact with live components
► Before starting damp cleaning, have the cable reels and extension cables dis-
connected from the mains power supply by an electrician.
► Do not open the enclosure during cleaning.
► Ensure that the covers of the sockets are properly closed.
► Ensure that no water comes into contact with live parts.
► Do not use high-pressure cleaners.

5.1 Dry cleaning

► Before cleaning, unplug all mains cables and close the cover of the sockets.
► Clean the outer surfaces of the cable reels and extension cables with a dry, clean cloth.

5.2 Damp cleaning

If cable reels and extension cables are very dirty, clean outer surfaces with a damp cloth.
Approved cleaning agents:
▪ 2 % soap solution
▪ Detergent, e.g. Persil
▪ Ethanol
CAUTION
Damage to property due to penetration of water and wrong cleaning agents.
► Do not open the enclosure during cleaning.
► Ensure that the covers of the sockets are properly closed.
► Ensure that no water comes into contact with live parts.
► Do not use high-pressure cleaners.
► Ensure that only approved cleaning agents are used.
► Before cleaning, unplug all mains cables and close the cover of the sockets.
► Only clean the outside surfaces using clean water, the approved cleaning agents and a
clean, damp cloth.
6

Maintenance

The operating company must have the cable reels and extension cables checked for proper
condition by a qualified electrician at regular intervals.
The manufacturer recommends that regular maintenance intervals should be adapted to oper-
ating conditions and installation site.
► Check cable reels and extension cables for damage before every use.
A visual inspection can be carried out by non-specialist persons.
WALTHER-WERKE Ferdinand Walther GmbH • 67304 Eisenberg • www.walther-werke.de
®
13