Environment Concerns; Declaration Of Conformity - auna Dazzle 5.0 Bedienungsanleitung

When the device is switched on, it is in BT pairing mode automatically (blue BT LED fl ashing).
Switch your smartphone/tablet on and activate BT. Connect to "Dazzle 5.0".
• Enter "0000" when prompted to enter a password.
• A corresponding sound signal will be played when the BT connection was successfully established
(this might take a few seconds) and the blue BT LED stops fl ashing.
Use the supplied 3.5mm audio cable to connect external media devices (cellphone, cd player, laptop PC,
etc.) with the LINE IN port of the Dazzle. Switch the Dazzle on. With an audio cable connected, the dazzle
automatically switches to LINE IN mode. Keep that in mind when you want to play music via BT again, and
thus remove the cable. The green LINE LED indicates LINE mode.
Use the supplied USB cable to connect the Dazzle to any free USB port of your computer or to a compatible
5V USB mains adaptor (not supplied).
The charging time is about 6-7 hours, when the Dazzle is not in use at the same time.
The red charging LED indicates the charging process. It switches off , when the battery is completely char-
ged.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will hep
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailled information about recycling of this product, please contact your local council or
your household waste disposial service.
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
2014/53/EU (RED)
2011/65/EU (RoHS)
8
BT: Pairing
LINE IN
Charge the Internal Battery

Environment Concerns

Declaration of Conformity