PURE Jongo T2 Schnellstartanleitung Seite 7

Connect Jongo to your Wi-Fi
EN
Insert the connector of the supplied mains lead into Jongo (A) and switch
Jongo on .
B
A
When the Power light turns solid green, briefly press the Wi-Fi
button (B) on the back and wait for the Power light to flash amber.
Note: If you press and hold the Wi-Fi button, your Jongo will start WPS
compatible pairing mode. To continue with the standard setup, briefly press
the Wi-Fi button on the back of your Jongo and wait for the power light to
flash amber before proceeding to step 2.
5