PURE Jongo T2 Schnellstartanleitung Seite 5

Power light states
/
/ /
Green (steady): Indicates that Jongo is on.
Amber (steady): Indicates that Jongo is in sleep.
Red (steady): Indicates that Jongo is in
standby/charging.
Green (pulsing x3): Indicates that Jongo is
preparing to stream audio.
Green (pulsing continuously): Indicates that
Jongo is busy connecting to a wireless network.
Green/amber (alternating): Indicates that you
have connected your device (smartphone/tablet)
to Jongo Setup Manager in Wi-Fi setup mode.
Amber (flashing x2): Indicates that you have
tried to increase the volume but Jongo is already
at maximum volume.
Amber (flashing continuously (slowly)):
Indicates that Jongo is in Wi-Fi Setup mode.
Amber (flashing continuously (rapidly)):
Indicates that Jongo is waiting for a file before
carrying out a software update.
Red (pulsing): Indicates that Jongo is booting up.
Red (flashing continuously): Indicates that
Jongo has an error (e.g. Jongo has failed to
connect to your Wi-Fi network).
Green/red/amber (flashing colour cycle):
Indicates that Jongo carrying out a software update.
DO NOT TURN JONGO OFF UNTIL UPDATE IS
COMPLETE.
EN
3