babyplus MatchPro Montage- Und Bedienungsanleitung Seite 7

Important:
Read these instructions carefully before use and keep them for future reference. Your child's
safety may be affected if you do not follow these instructions. Incorrect assembly may make the
stroller unsafe. Keep this instructions for future reference.
Unpack from box
Please check following parts are included in the packaging:
• 1 stroller body with 1 basket and rear wheels
• 2 sets (4pcs) front wheels
• 1 canopy
To open stroller
Release folding latch and open the frame then step down the base lock until it is fully locked.
1
3
2
1. Assembly of the buggy
a. Front wheel assembly: Before assembly to the front legs, make sure that the lock mechanism is well
attached each of the front wheel before assembly. Hold one front frame leg, push the whole of front
wheel set until covered with front leg tube and the wheels come to a stop. Repeat on the other side of
front wheel.
4
5
b. Fitting canopy: Put canopy hoop front into position
and buckle both side onto handle tube and also buckle
the velcro both handle tubes behind the canopy.
6
7
GB D