Kaiser EG 6375 Sp Gebrauchsanweisung Seite 20

20
1
2
Adjustment of the minimum setting
following conversion to a different gas type
Conversion from natural gas to LPG
Ovens with stainless steel front:

Turn the temperature control knob to the
minimum position,

Then remove the knob. Insert a screwdriver
through the aperture to engage the bypass
1
screw 1,

Turn the screw fully to the right.
Ovens with glass fronts:

Turn the temperature control knob to the
minimum position,

Remove the front by unscrewing the two
ring nuts,

Insert a screwdriver through the hole in the
front wall of the oven and turn the screw 1
fully clockwise.
Conversion from LPG to natural gas

Turn the oven temperature control knob to
the „Minimum" position and allow the
appliance to warm up for about 10 minutes,

Then turn the bypass screw anticlockwise
to a obtain a low but stable flame,

Replace the front.
Attention! After converting the appliance
to a different type of gas, remember to
change the data plate 2 to one with the
new data (gas type and pressure)
EN