Maintenance - be cool ZERO Gebrauchsanweisung

Never add a mattress pad, pillow or extra padding to make it more comfortable for the child as
this will alter the safety characteristics of the system.
Check that the seat has been positioned correctly.
Make sure that the seat belt is not trapped between the folding seats or doors.
RECOMMENDATIONS
Keep this instruction book for future reference. Always keep it in its compartment under the
safety seat.
Make sure that inside the car, luggage and any other object likely to cause harm in an accident
are correctly fastened or stored.
The ZERO safety seat must be fastened correctly with the seat belts or ISOfix base, even if it is
not in use, as it could be thrown around in an accident and harm the occupants of the car.
Remember not to use the ZERO safety seat in cars fitted with front air-bags, unless they can be
disconnected or deactivated. You will need to check this with the car manufacturer or seller.

MAINTENANCE

Do not expose the cover to extended periods of sunlight. While the seat is not in use, cover it
or store it in the boot.
Wash the plastic parts in warm soapy water and dry all the components thoroughly. The cover
can be removed for washing for which you should follow these instructions:
First undo the clips on the sides and remove the elastic from around the front belt guides. Take
the fabric off from around the edges of the baby carrier. Next, pass the buckle through the
crotch strap slot and pass the shoulder straps through the slots on the backrest. Lastly, remove
the upholstery from the area of the tightening button.
Wash by hand and never above 30ºC.
Follow the same procedure but in reverse to put the cover back on.
For your safety and the good conservation of this product, it is important to bring it to one of
our official workshops for regular inspections.
17