Axis M1124 Installationshandbuch Seite 16

AXIS M11 Network Camera Series
Digital
Input
Digital
Output
Power Connector
2-pin terminal block for DC power input. Use a
Safety Extra Low Voltage (SELV) compliant limited
power source (LPS) with either a rated output power
limited to ≤100 W or a rated output current limited
to ≤5 A.
3
Connect to pin 1 to activate, or
leave floating (unconnected) to
deactivate.
4
Connected to pin 1
when activated, floating
(unconnected) when
deactivated. If used with
an inductive load, e.g. a relay,
a diode must be connected
in parallel with the load, for
protection against voltage
transients.
16
0 to max 30 V DC
0 to max 30 V DC,
open drain,
100 mA