Konfiguration Der Karte - Eaton BD Benutzerhandbuch

Konfiguration der Karte

Die Karte wie folgt konfigurieren:
1. 1 eingeben, um zum Einstellungsfenster für die Web/SNMP-Karte zu gelangen
(siehe Abb. 15).
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= =
[ ConnectUPS Web/SNMP Card Configuration Utility ]
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= =
1. Web/SNMP Card Settings
2. Reset Configuration to default
3. Restart Web/SNMP Card
4. UPS Pass-Through
0. Exit
Please Enter Your Choice =>1
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= =
[ ConnectUPS Web/SNMP Card Configuration Utility ]
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= =
1. Set the IP Address, Gateway Address and MIB System Group
2. Set Web/SNMP Card Control Group
3. Set Write Access Managers
4. Set Trap Receivers
5. St IP Addresses of Primary and Secondary Date Server
6. UPS Event Actions
7. Set UPS Information
8. Set Superuser Name and Password
9. Email Notification
10. Set Website Links
11. Card Settings and Event Log Summary
12. Set External Contact Monitoring
0. Back to Main Menu
Please Enter Your Choice =>_
2. 1 eingeben, um zum Fenster Set the IP Address, Gateway Address and MIB
System Group zu gelangen. Geeignete Einstellungen für Ihr Netzwerk
eingeben (siehe Seite 23).
Benutzerhandbuch ConnectUPS
Einstellungsfenster – Web/SNMP-Karte
TM
Web/SNMP-Karte • 164201405 Rev B - 23 -