Gree GPC10AL-K6NNA1A Betriebsanleitung Seite 36

Introduction for buttons on remote controller
Note:
● After putting through power, air conditioner will give out a sound and operation
indicator " " is ON (red indicator). You can operate the air conditioner through
the remote controller.
● At ON status, after each pressing button on remote controller, the signal icon "
indicates the signal has been sent to air conditioner.
● At OFF status, display screen on remote controller displays set temperature.
At on status, display screen on remote controller displays the corresponding startup
function's icon.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the unit,
operation indicator "
ent for different models) and the unit gives out a sound.
2
MODE button
Press this button can select your required operation mode.
● After selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and also can't be displa-
yed. Press "FAN" button can adjust fan speed.
● After selecting cool mode, air conditioner operates under cool mode. Cool indicator
" " on the unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button can adjust fan speed.
● After selecting dry mode, air conditioner operates under dry mode at low speed.
Dry indicator "
justed.
● After selecting fan mode, air conditioner operates only under fan mode, All mode
indicators on the unit is OFF. Operation indicator is ON. Press "FAN" button can
adjust fan speed.
● After selecting heat mode, air conditioner operates under heat mode. Heat indicator
" " on the unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button to adjust fan speed.
Cool&Heat Unit only
" on the unit is ON (green indicator. Color may be differ-
AUTO COOL
" on the unit is ON. Under dry mode, fan speed can't be ad-
DRY FAN
EN|36
HEAT
"