Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BDA_Solis_Wasserkoche#478E3.qxd
9.1.2006
Know your SOLIS Design Kettle PRO
Removable scale filter
Filters out scale deposits for
cleaner water and prolongs
element life
Premium quality brushed
stainless steel
1.7 litre capacity
Fast boil 2200 watt
concealed element
Multi directional power
base with cord storage
16
12:01 Uhr
Seite 16
Cushion control lid
Viewing window in top of kettle
Lid release button
Soft grip handle
Illuminated
water gauge
Illuminated power
'on' light
On/Off switch
Safety auto cut out and
boil dry protection
Operating your SOLIS Design Kettle PRO
Before first use
Note
Remove any promotional materials and packaging
This kettle must only be used with the power
materials before use. It is recommended that before
base supplied. Use caution when pouring water
the first use the kettle is filled to the maximum level,
from your kettle, as boiling water will scald. Do
boiled and water discarded. Your kettle will only
not pour the water too quickly.
operate when positioned on the power base with the
On/Off switch in the On position. The kettle will
The kettle will automatically switch 'Off' once the
automatically switch off once the water has boiled.
water has boiled. Lift the kettle from the power base
and pour the water. Take care to hold the kettle level,
Operation of your kettle
especially when filled to the maximum level. To
1. To fill the kettle, remove it from the power base
re-boil it may be necessary to wait for a few seconds
and open the lid by pressing the lid release button.
to allow the control to reset.
Fill with the desired amount of water. Always fill
The kettle may be stored on its power base when not
the kettle between the minimum and maximum
in use. Unplugged the appliance from the power
marks on the water window. Too little water will
when not in use.
result in the kettle switching off before the water
has boiled.
Safety boil dry protection
The kettle is fitted with a safety device, which
2. Ensure that the lid is locked firmly into place.
protects against overheating should the appliance be
Place the kettle firmly onto the power base. Plug
operated with insufficient water. If this occurs the
the power cord into 230V power point.
kettle will stop heating. Switch 'Off' at the power
point and allow kettle to cool before refilling. The
3. Press the On/Off switch to the 'On' position.
safety device will automatically reset when the kettle
has cooled down.
The power 'On' light and the water guage will
For additional safety your kettle is fitted with an
illuminate.
additional thermal cut out. In the event of
overheating, the kettle will automatically shut down
Note
to prevent further damage. Should this occur, take
Always fill the kettle between the minimum
your kettle to an authorised SOLIS Service Centre.
(Min) and the maximum (Max) marks on the
exterior of the kettle. Too little water will result
in the kettle switching 'Off' before the water
has boiled. Filling above the maximum mark on
the exterior of the kettle may result in boiling
water splashing from the kettle.
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY, NEVER USE IT
TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS BE FIRMLY IN
PLACE AND LOCKED CLOSED BEFORE USE.
17
Werbung
Inhaltsverzeichnis
