Speaker Connections; Specifications; General Care - JBL S2-1024SS Bedienungsanleitung

SERIES II ENCLOSURES

SPEAKER CONNECTIONS

Connect the + and – terminals on the enclosure to the amplifier's outputs, observing proper polarity. Use at least 0.5mm
(20 AWG) speaker wire for the connections to the enclosure.
BATTERY

SPECIFICATIONS

S2-1024SS
Speaker type: 10" Slipstream Ported Enclosure
Woofer: 10" (250mm)
Power handling, RMS: 250
Power handling, peak: 1000
Sensitivity (2.83V/1m): 92dB
Frequency response: 30 – 175Hz
Impedance: 2 or 4 ohms, switch selectable
Dimensions 22-1/2" x 12-7/16" x 15-3/16"
(L x D x H):
570mm x 315mm x 385mm

GENERAL CARE

The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for
connection to the mains.
HARMAN International Industries, Inc.
8500 Balboa Boulevard, Northridge,
CA 91329 USA
www.jbl.com
HEAD UNIT
Remote
L R
Turn-On
Speaker Out
AMP
S2-1224SS
12" Slipstream Ported Enclosure
12" (300mm)
275
1100
93dB
25 – 175Hz
2 or 4 ohms, switch selectable
23-5/8" x 13" x 16-3/8"
600mm x 330mm x 415mm
© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated registered in the United States
and/or other countries. Features, specifications and appearance are subject to change without notice.
2
Series II
Subwoofer Enclosure