Troubleshooting; Service And Repair - Ronda 370 Betriebsanleitung

Brugsanvisning / Betriebsanleitung / User Manual

Troubleshooting

If the machine does not collect in a satisfactory way:
The suction hose, tube or nozzle may be blocked.
Stop the machine, and remove the blocking.
The collection container may be filled to overflowing. The float valve has been designed to protect the suction
motor by blocking the air to the motor when the collection container is filled with liquid. ..
Stop the machine, and empty the container.
The filter may be blocked.
Take out the collection bag and rinse it with large quantities of clean water, so that remaining particles will be
removed.
If the pump does not supply water:
Clean the pre-filter and fine filter.
Check the hose connections, including whether the discharge hose has a bend, which may reduce the liquid
flow.
Check that the cord of the pump has been connected to the motor top.
The built-in overload circuit breaker may have been activated. This may be due to the fact that the pump is
blocked by a stone or the like.

Service and Repair

Service and repair are provided free of charge within the guarantee period (invoice must be presented) provided
that:
The defect has been caused by a construction defect or defective materials (Normal wear and tear, misuse or
insufficient maintenance is not covered by the guarantee).
No repair attempts have been made by others than V. BRØNDUM A/S, or service centers approved by V.
BRØNDUM A/S to carry out guarantee repairs.
RONDA 370
V. BRØNDUM A/S
Sadolinsvej 14-16
DK-8600 Silkeborg
P: +45 8682 4366
M: v@broendum.com
I: broendum.com
36 V. BRØNDUM A/S