Getting Started - M-Audio OXYGEN61 Benutzerhandbuch

User Guide (English)
Box Contents
Oxygen 61
USB Cable
Ableton Live Lite
Software Download Card
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.) and product
registration, visit m-audio.com/oxygen61.
For additional product support, visit m-audio.com/support.
Setup
Connecting Your Keyboard
1. Plug the USB cable provided with your Oxygen 61 to a free USB port on your computer.
2. Plug the other end of the USB cable into the USB input on the Oxygen 61.
The single USB cable not only powers the keyboard but also sends MIDI data to and from your computer system. If
you intend to use your Oxygen 61 with a USB hub, make sure the USB hub uses an external power supply. Using a
passive USB hub which does not use a power supply may not provide enough power if other devices are connected
to the hub. We do not recommend connecting an audio interface to the same USB hub as the Oxygen 61.
You can also use Oxygen 61 with your iPad Camera Connection Kit to control supported music creation apps. The
iPad Camera Connection Kit is available from the Apple Store.
DirectLink Installations
Rather than assigning parameters one by one, DirectLink automatically maps Oxygen 61's controls to many of the
most frequently used digital audio workstation (DAW) features and settings. When used with a supported DAW, you
can control the transport, mixing controls (faders and panning) and virtual instrument or signal processing plug-in
parameters. You can also switch between DirectLink and custom MIDI operation on the fly to match your particular
needs.
To enable DirectLink with your Oxygen 61, you may need to install some additional software, including the DirectLink
"personality" for your specific DAW. Visit m-audio.com/directlink for a current list of DAWs that support DirectLink
and to download any necessary profiles.

Getting Started

Connect the Oxygen 61 to your computer and then open your software. In your software's Preference's, Options, or
Device Set-Up menu, select Oxygen 61.
For further information about configuring your software to receive MIDI data from your Oxygen 61, and using software
instruments with the application, refer to the documentation provided with that product.
SUSTAIN POWER
USB C33 ON OFF
Sustain Pedal*
3
Computer*
*not included