Hella 8PE 185103-291 Bedienungsanleitung Seite 9

Electronic brake fl uid tester
This brake fl uid tester measures the boiling point of brake fl uids of the type DOT 3, DOT 4
and DOT 5.1. The selected brake fl uid and the test result are indicated by LEDs.
Safety Advice
9
Important notes:
• This system is only suitable for testing brake fl uids.
• Brake fl uids of the type DOT 5 that contain silicone cannot be tested with this system.
• When testing other media, a result is shown, but it is not relevant.
• The system may only be operated by trained personnel.
• Caution: Brake fl uid is a strong irritant, therefore, contact with the
skin and eyes, as well as with clothing, should be avoided.
• Furthermore, the brake fl uid should not touch the paint of the
vehicle, as it can damage it.
• The safety regulations of the brake fl uid manufacturer must be
observed.